BENCHMAN-XT-Industrial CNC Machining Centers
Today's manufacturers face a number of challenges, from custom manufacturing to mass production. To meet these challenges, manufacturers must adopt agile manufacturing techniques and use cost-effective equipment like benchtop CNC machines.
Standard Features:
Linear ball bearing guideways for rigidity and accuracy
Laser calibrated for optimum accuracy
Cast polymer, one-piece base and column
12" x 7" x 9.5" travel, 12" open height
Precision-ground cast iron table
Zero backlash ballscrews
Full enclosure with lock and interlock switch
Covers on slideways and ballscrews
32-Bit Digital Signal Processor motion control card
Front operator panel for easy set-ups
"43 x 43" footprint
Windows NT 4.0 w/Service Pack 3 control software
Superior ergonomics for small parts production
Accuracy:
Positioning: ±0.0002" (.00508 mm)
Repeatability: ±0.0001" ( 0.00254 mm)
Resolution: 0.00002" (0.000508 mm)
Axis Drive Motors
Feed rate: 0.1 -200 ipm (2 - 5080 mm/min)
Motor Type: DC servo
Torque: 42 oz. in. (30 Ncm)
Z-axis thrust force: 80 lbf (356 N)
X, Y- axis thrust force: 50 lbf (222 N)
Power Requirements:
230 VAC, (+5% - 10%), 50 - 60 Hz, 20A, single phase
Dimensions
Width 43" (1092 mm)
Depth 42.5" (1080 mm)
Height 56.5" (1435 mm)
Weight (approximate)
Machining Center
Net 800 lbs (363 kg)
Shipping 900 lbs. (408 kg)
Light Machines, A Davenport Industries Company, 444 East Industrial Park Drive, Manchester, NH 03109-5317. Tel: 603-625-8600; Fax: 603-625-2137.